FLUITRONIC POWER UNITS WITH SUBMERSED ENGINE

COASTAL LIFT SUPPLIES

Safety, operational efficiency and long term reliability. The GMV power units are one of the most important components of the GMV hydraulic lift system. A wide range of products allows the assembly of components for all types of elevator systems, suitable for residential as well as for industrial environments.

GL POWER UNIT

The GL power unit is characterized by a new, smaller-sized tank to gain space and to use a reduced quantity of oil.

The power unit features the same range of components as the traditional 3010 EN line, in order to guarantee excellent travel comfort and reliability.

Like all other GMV power units, the GL version may be equipped with the traditional distribution valve or with the more sophisticated electronic valves.

It is available with a pump flow rate from 25 to 180 l/min and is designed for hydraulic installations with a built-in machine room as it fits in our cabinet type C.

Technical Data3010NGV A3
50 Hz60 Hz50 Hz60 Hz
2 poles – 1 phase2 poles – 3 phases2 poles – 3 phases2 poles – 3 phases2 poles – 3 phases
Engine power [kW]2.9 ÷ 3.42.2 ÷ 14.72.2 ÷ 14.72.2 ÷ 14.72.2 ÷ 14.7
Nominal pump flow rate [l/min]30 ÷ 5525 ÷ 18030 ÷ 18055 ÷ 21066 ÷ 216
Maximum static pressure [bar/MPa]45 / 4,5
Minimum static pressure vacuum [bar/MPa]12 / 1,2
Unladen weight [kg]max. 90
Total Fluid filling quantity [l]120
Fluid quantity in circulation (used) [l]max. 75
Minimum Fluid (pump covering) [l]45

POWER UNIT F1

The power unit F1 is part of the range of the GMV power units with a medium-sized tank, suitable for lift systems of 6-8 passengers and 6-7 stops. The particular design of the tank allows a reduced quantity of oil in circulation.

The power unit features the same range of components as the traditional 3010 EN line, in order to guarantee excellent travel comfort and reliability.

Like all other GMV power units, the F1 version may be equipped with the traditional distribution valve or with the more sophisticated electronic valves.

It is available with a pump flow rate from 25 to 210 l/min and is designed for hydraulic installations with a built-in machine room as it fits in our cabinet type A and B.

Technical Data3010NGV A3
50 Hz60 Hz50 Hz60 Hz
2 poles – 1 phase2 poles – 3 phases2 poles – 3 phases2 poles – 3 phases2 poles – 3 phases
Engine power [kW]3,42.2 ÷ 14.72.2 ÷ 14.72.2 ÷ 14.74.7 ÷ 14.7
Nominal pump flow rate [l/min]30 ÷ 5525 ÷ 21030 ÷ 21655 ÷ 21066 ÷ 216
Maximum static pressure [bar/MPa]45 / 4,5
Minimum static pressure vacuum [bar/MPa]12 / 1,2
Unladen weight [kg]max. 100
Total Fluid filling quantity [l]130
Fluid quantity in circulation (used) [l]max. 90
Minimum Fluid (pump covering) [l]40

POWER UNIT 3010 EN TYPE T2, T3, T4

The power unit 3010 EN is designed to ensure maximal travel comfort in hydraulic systems. It is available with a wide range of possibilities in order to combine power, capacity and size, for meeting every demand. The mechanical valve 3010 EN is constantly involved in any moment of the travel of the elevator, in terms of speed, accelerations and decelerations, in order to guarantee a proper functioning of the lift to changing pressure and temperature conditions.

For large-scale elevators, the power units are provided in a double version, with a double valve and propulsion system.

For larger quantities of oil, tanks may be produced in double size or in a special design and it is possible to install the leveling to floor device.

By testing every single part of the unit, besides assuring the proper functioning of the power unit, a pre-calibration of the valve with parameters similar to its intended use, is carried out: the adjustments on-site will thus be simple and essential.

For large-sized elevators, the power units are provided in a double version, with the possibility of a double valve and propulsion system.

For larger quantities of fluid, it is possible to supply tanks in special dimensions.

Type

Tank

Valve typeValve block sizeFlow rate

[l/m]

Engine power

[kW]

Unladen weight [kg]Capacity [l]
minmaxminmaxMin. fluidFluid quantity in circulation (used)Total filling fluid
T230101”1/4”522162,922,018070150220
NGV A3552522,2
T330101”1/2”1804329,544,1270100300400
NGV A31”1/4”553002,229,4
1”1/2”36043214,744,1
T430102”43260022,058,8360250400650
NGV A31”1/236043214,744,1
2”50060022,058,8

POWER UNIT 3010 EN TYPE 2T2, 2T3, 2T4

For large-sized elevators, the power units are provided in a double version, with the possibility of a double valve and propulsion system. For larger quantities of fluid, it is possible to supply tanks in special dimensions.

Type

Tank

Valve typeFlow rate

[l/m]

Weight without fluid [kg]Capacity [l]
min.max.Min. FluidFluid quantity in circulation (used)Total filling fluid
2T2301052216390140300440
2T33010180432570200600800
2T430104326007505008001300

FLUITRONIC POWER UNITS MRL-T AND MRL-H

Power units for the machine room less systems. Like other GMV power units, the MRL-T and the MRL-H versions can:

  • be equipped with traditional distribution valves or with the more sophisticated electronic valves
  • operate with a synthetic-based ecological fluid, which is biodegradable > 70%, or with traditional mineral oil
Technical DataMRL-T power unit
3010 / NGV A3
50 Hz60 Hz
2 poles – 3 phases2 poles – 3 phases
Engine power [kW]4.7 ÷ 18.44.7 ÷ 18.4
Nominal pump flow rate [l/min]55 ÷ 21066 ÷ 216
Maximum static pressure [bar/MPa]45 / 4,5
Minimum static pressure vacuum [bar/MPa]12 / 1,2
Unladen weight [kg]max. 100
Total Fluid filling quantity [l]125
Fluid quantity in circulation (used) [l]max. 75
Minimum Fluid (pump covering) [l]50
WordPress Theme built by Shufflehound.

© 2018 Coastal Lift Supplies
Website design and development : Big Purple Box