GMV supplies complete systems for the replacement of existing lifts or for the installation of new lifts in buildings without lift so far, in compliance with the recent safety standards (EN 81.20 and EN 81.50).

GMV ‘s wide product range provides electric systems with or without machine room or with a “machine room cabinet”, to replace electric elevators with a machine room, and even the Green Lift® Fluitronic® (GLF) as well, to replace hydraulic and electric systems with travelling heights up to 16 – 19 m.

According to the characteristics of the system to be replaced, it is often possible to achieve the following advantages, without any further modification of the lift shaft:

• Installation of automatic landing and car doors to facilitate accessibility for the users
• An increased surface area of the lift car and therefore a greater capacity for the transport of passengers
• Compliance with the standard EN 81.70 concerning the elimination of architectural obstacles.

In any case, all provided electric lifts allow:

• Considerable saving in terms of energy consumption
• Significantly improved performance and travel comfort (gradual and imperceptible accelerations and decelerations and accuracy of leveling to floor) due to the VVVF inverter driven motor.

GMV supplies electric lift systems to replace those with machinery placed in the machine room.

By using the electronic NGV valve and the dry motor, Green Lift® Fluitronic® (GLF) allows:

• Low power consumption
• Considerable reduction of the installed power compared to the traditional hydraulic systems
• Significant increase of travel comfort
• Same operating performance as the best electric systems of latest generation (which are much more expensive), equipped with VVVF regulators

By choosing the Green Lift® Fluitronic® to replace an electric lift with up to 6 stops, there is no need of a counterweight (which is part of electric lifts) and the surface area of the lift car is increased of up to 30 %.

For example, the typical mechanical elevators with load capacity of 320 kg (4 persons), which were frequently installed in Italy during the 60s and 70s, may now be replaced by lifts with fluitronic technology with load capacity of 450 kg (6 persons).

We can supply and fit the full range of GMV Lifts as well as offering full repair and maintenance packages with official GMV parts.